Search

You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate button.

Results


freesco:howtos:how-to_setup_a_mail_server: 17 Hits
**P**rotocol server permits you to do just that. Using a username/password (usualy the same as when you ... See [[howtos:telnet_-_smtp_commands_sending_mail_using_telnet|telnet smtp]] and [[howtos:telnet_-_pop_commands_retrieving_mail_using_telnet|telnet pop]] for a list of commands.\\ \\ This is the minimalist
freesco:howtos:installing_nic_s: 15 Hits
X corresponds to a FREESCO version (so if you are using FREESCO 032, you should look for "modules 032"). ... ways, depending on the card: * "Statically" by using jumpers on the card or using a DOS utility * "Dynamically" by using ISA Plug'n'Play (ISA PnP). Not all cards support ISA PnP so this might not be
freesco:howtos:setting_up_an_development_environment: 13 Hits
/fredrik/freesco/ ===== Introduction===== After using FREESCO for a while, you might be interested in d... compile applications in a Linux/UNIX environment (using make) to benefit from the instructions. You shoul... It will be possible to access the machine remote (using telnet or VNC), so the machine will be accessible
freesco:manuals:rfc1918: 12 Hits
is an entity autonomously operating a network using TCP/IP and in particular determining the addre... ic hosts of different enterprises. The cost of using private internet address space is the potentia... easy to identify a substantial number of hosts using TCP/IP that do not need network layer connecti
freesco:howtos:howto_unison_and_xinetd: 10 Hits
his allows creating a more secure environment for using Unison over sockets. Following is how I set up Unison under a "chroot jail" using tcpd and xinetd. I have tested this only on Red Hat 7.2. Before yo... on my server. Note that this is NOT the same as using Unison's built-in SSH connection feature (ssh://)
wiki:syntax: 10 Hits
==== Internal ==== Internal links are created by using square brackets. You can either just give a [[dok... re not allowed. Internal links are created by using square brackets. You can either just give a [[p... not allowed. You can use [[wiki:namespaces]] by using a colon in the pagename. You can use [[wiki:na
freesco:howtos: 9 Hits
probes]] * [[freesco:howtos:Create a CGI script using only shell scripting]] * [[freesco:howtos:Setti... rized_keys|How-to login secure without a password using dropbear]] * [[freesco:howtos:ssl_cert|Howto cr... ficate for Apache]] * [[freesco:howtos:log_sort|Using shell scripts to sort and file your logs]] * [[
freesco:manuals:clients:winnt:printing: 7 Hits
g TCP/IP print jobs. These functions are provided using the Line Printer Remote (LPR) protocol, for sendi... rint job directly from the command-line interface using the LPR.EXE utility. Finally, if you want to get... , and as a TCP/IP print server. It also discusses using the LPR.EXE and LPQ.EXE command-line utilities an
freesco:howtos:howto_configure_xinetd: 7 Hits
n_failure). * **USERID** — Logs the remote user using the method defined in RFC 1413 for all multi-thre... ppers Configuration Files. This section discusses using xinetd to control access to services. == Note ==... ice. * **no_access** — Blocks listed hosts from using the service. * **access_times** — Specifies the
freesco:manuals:027:2._installation: 7 Hits
g card, and then reinstall the second card. When using ISA cards in a PCI machine it is important, espec... b free on a fresh Freesco 0.2.7 floppy. If you're using the DHCP server you should keep at least 20kb fre... rename the driver to a short name when installing using this method. Warning! You must unmount the disk b
freesco:howtos:plug_and_play: 6 Hits
totally comment out any devices that you won't be using in your machine, such as any sound cards, joysti... been made, we can save our changes and try it out using the isapnp command: <code>/rc/rcuser/isapnp /mnt... running this command and the card(s) will now be using the IRQ and IO port we specified in the file. If
freesco:howtos:null_modem: 6 Hits
====== Using a null modem cable with Freesco ====== Freesco has integral support for dial-in modems but ... temporarily to an established Ethernet network. Using null-modem cables it is possible, by clever use o... ll versions of Windows and a dummy DUN connection using that driver) and can be simply and quickly instal
freesco:howtos:setup_ssh_tunnel_to_connect_with_vnc_server: 6 Hits
====== HOW-TO: VNC secure tunneling using Windows PuttY ssh client.====== **Objective:** Getting secure ... ed results:** Secure connection to remote desktop using open source VNC or Tight VNC software (that is no... er/firewall (check www.FREESCOsoft.com if you are using FREESCO for latest openSSH software) or use the s
freesco:howtos:ad-blocking_with_freesco_without_ruining_the_hosting_page: 6 Hits
s: ==== * README - Contains information about using the Adblocker * RAMDISK - Custom ramdisk file f... 7 is available from http://www.freesco.org ===== Using the RAMDISK ===== The setup procedure is divided... on top. === Prepare the Freesco 0.2.7 floppy disk using the original Freesco 0.2.7 file === download it
 
 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki