Search

You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate button.

Results


freesco:howtos:howto_configure_xinetd: 12 Hits
This section highlights some of the more commonly used options. === Logging Options === The following l... f.\\ Below is a list of some of the more commonly used logging options:\\ * **ATTEMPT** — Logs the fac... RATION** — Logs the length of time the service is used by a remote system (log_on_success). * **EXIT**
freesco:howtos:installing_nic_s: 11 Hits
NIC or using the DOS utility. I have successfully used IRQ 10, 11, 12 and I/O 0x210, 0x300, 0x330. ... ll rows are commented out so none of this will be used by your FREESCO. What needs to be done is to edit... use\\ The file shows that address 0x0200 will be used for this card: <file># (IO 0 (BASE 0x0200))</file
freesco:manuals:027:3._configuration: 9 Hits
ng from a hard drive, (assuming you've previously used move2hdd) type: **router.bat setup** at the C:\> ... **setup**//. The only exception is that the modem used for the dialin server cannot be autodetected if t... if}}\\ A standard internal or external modem is used to dial an ISP at up to 56k. An internal modem mu
freesco:howtos:setting_up_an_development_environment: 9 Hits
w to set up a development environment that can be used to compile and package applications for FREESCO. ... lso work, but I believe Zipslack is most commonly used and hence focused here. [ [[setting_up_an_develo... op ]] ] ====Limitations==== This document is focused on how to set up the development environment; it
freesco:howtos:build_in_commands: 8 Hits
etwork for new machines anytime MAC addresses are used in the restrict.cfg file. /bin/backup Script Usa... ry Usage: brcfg -enable This binary should NOT be used directly from the command line and it is included... /bin/connect Script Usage: None This is a script used internally by FREESCO for dialup connections. /
wiki:syntax: 8 Hits
===== Smileys ===== DokuWiki converts commonly used [[wp>emoticon]]s to their graphical equivalents. ... ither indenting them by at least two spaces (like used for the previous examples) or by using the tags '... e previous section, but this time the name of the used language is inserted inside the tag. Eg. ''<nowik
howtos:ip-subnetworking: 6 Hits
a single IP network number up so that it can be used on several different networks. This document ... rk interface) itself. Exactly how many bits are used by the network ID and how many are available to i... e broadcast address of an IP network (the address used to 'talk', simultaneously, to all devices in
freesco:manuals:03x:relnotes034: 6 Hits
one network card installed. Now this mode can be used on multiple interfaces. What this mode does is if... than two. Previously ram disk #1 was almost never used by the system other than for /tmp directory space... d for the mv2hd command. But other formats can be used with a custom installation, such as ext2 which ca
freesco:howtos:plug_and_play: 6 Hits
Because Freesco is Linux, these tools can also be used on Freesco, although some manual configuration is... where they occupy a fixed IRQ and port can now be used with Freesco. But how do you go about this? It's... " (which in this case is RTL8019, a chip commonly used on NE2000 network cards). You should really tota
freesco:manuals:rfc1918: 5 Hits
ectivity), regardless of whether the addresses used by the organization initially were globally un... Internet registry. The address space can thus be used by many enterprises. Addresses within this pri... hat has not been connected to the Internet had used IP address space for its hosts without getting th
freesco:howtos:ad-blocking_with_freesco_without_ruining_the_hosting_page: 5 Hits
other pages. * config.h - The config.h file used to build this custom version of thttpd-2.20c. Inc... s. Of course, under GNU/Linux the tar tool can be used. === Boot the system from the Freesco 0.2.7 flopp... pology of your network, and the operating systems used on the DNS relays. - Use http://ssmedia.com/ut
freesco:howtos:el_cheapo_vpn_tunnel: 4 Hits
ord -l allow dns lookups so host names can be used -n do not become daemon -t do modem init ... mmand. * The 172.16.0.1 and 172.16.0.2 IP's are used for the pseudo serial interface (**sl0**) that is... the dynamic IP address of the client, 0.0.0.0 is used in the config. For an extra level of security it'
freesco:manuals:03x:license: 4 Hits
fore, licenses are not include for each software used. In order to know what license is published in a... ections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany i... ections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany i
freesco:howtos:pcmcia_howto: 4 Hits
cards really need to be PCMCIA if they are to be used in a laptop but PCMCIA is not present in Freesco. At least... until now. PCMCIA devices can be used with Freesco, using the compiled versions of the ... stage of integration, they have been successfully used to enable Freesco to use a 10Mbps Ethernet PCMCIA
start: 4 Hits
sidebar: 1 Hits
 
 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki