Search

You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate button.

Results


freesco:howtos:freesco_03x_mv2hdd_howto: 19 Hits
on HD * Just jump to the shell. If you don't type anything within 8 seconds, you will be taken to t... and start over. As we want to install on the HD, type <code>mv2hd</code> and press Enter. The router ... you are happy with that value, you don't have to type anything, you can just press return. On the other
freesco:howtos:dialin_setup_howto: 13 Hits
ction, log in as root. - At the [Linux] prompt, type **setup** [enter]. - Type c or m or nothing [enter]. - Type a for a) Advanced settings. - Type the corresponding numbers for the following acti... #8221;, otherwise not, it seems.</code> - Then type x to exit from Advanced setup. - Then type s fo
freesco:howtos:forward_a_port: 11 Hits
the web panel ==== Open you favorite browser and type http://your.freesco.ip:82 in the URL address bar.... ^ | Type | Type of port, there are two //flavours//, UDP o... | | Port | The port number depends on the type of game or service | | | f.i. port 80 is u
freesco:howtos:howto_configure_xinetd: 8 Hits
instances = 60 log_type = SYSLOG authpriv log_on_s... { flags = REUSE socket_type = stream wait = no ... f requests xinetd can handle at once.\\ * **log_type** — Configures xinetd to use the authpriv log fac
freesco:howtos:compiling_programs_for_use_with_freesco: 7 Hits
n DOS, indicated by a C:\> or C:\WINDOWS> prompt, type: <code>CD\LINUX</code> You should see the prom... startup file to indicate the correct hard drive. Type: <code>EDIT LINUX.BAT </code> You should now be ... Then, simply ignore the instructions above. Now type: <code>LINUX </code> You should see Linux start,
freesco:howtos:howto_unison_and_xinetd: 6 Hits
for root only: service unison { type = UNLISTED protocol = tcp socket_type = stream port = 7654 flags = NAMEINARGS s... et's go over what each of these lines means: type = UNLISTED: This allows us to create a service th
freesco:manuals:027:2._installation: 6 Hits
t cards should be set to Legacy. There are three types of modems freesco will work with - external mode... sert the disk into a running freesco machine, and type the following: <code> mount -t vfat /dev/fd0 /fd... cards ==== Here are a few suggestions for common types of cards which may require special attention to
freesco:howtos:finding_your_external_ip_address: 6 Hits
ot (via telnet). If you're using Freesco v0.2.7, type: <code>cd /mnt/router/fix edit getip</code> If you're using Freesco v0.3.0, type: <code>cd /boot/bin edit getip</code> Now, type the following:... d. Next, you need to make the script executable. Type: <code>chmod 755 getip cp getip /bin</code> No
freesco:howtos:how-to_setup_a_mail_server: 5 Hits
, teddy).</note> To edit the file you can simply type :\\ **edit /etc/exim.conf**\\ (followed by <enter... exim works using telnet.\\ Log in as **root** and type: <code>telnet localhost 25</code> <box 100% round... 4.50 Sat, 04 Feb 2006 03:12:34 +0000</code> then, type <code>quit</code> and try <code>telnet router.ip.
freesco:howtos:build_in_commands: 5 Hits
/bin/ipautofw Binary Usage: ipautofw COMMAND -r TYPE nn xx -h yyy.yy.yy.yy COMMAND must be either -A -D or -F TYPE must be either udp or tcp -F flushes all current ipautofw forwards. -A adds forwa... ary Usage: mount [-hV] mount -a [-nfFrsvw] [-t vfstypes] mount [-nfrsvw][-o options] special | node mo
freesco:howtos:how-to_make_ssh_more_secure: 5 Hits
. <code>Advanced settings (x - exit) []? 47</code>type <enter>, then here : <code> Enable SSHD t... nswer s. 47 Enable SSH server y/s/n [y]?</code> type "y" and <enter>, when asked : <code>471 SSH port [22]? 222</code>type the port number you would like ssh to use (for instance 222 ) followed by <ente
freesco:howtos:setting_up_reverse_dns_for_your_subdomains: 4 Hits
your Freesco box via telnet (under Windows, just type telnet <your router's ip>) and login as root. Type: <code>cd /mnt/router/etc edit named192.rev</code> NOTE: You need to replace named192.rev abov... rm. Finally, you should restart your nameserver. Type: <code>cp /mnt/router/etc/named*.rev /etc rc_na
freesco:howtos:setting_up_an_development_environment: 4 Hits
achine and boot to DOS. Once you are in DOS, just type <code>linux</code> and Zipslack should start.... tinue with this step you should find out the name/type of your NIC, otherwise the kernel can't be config... is menu, select the sub menu "(Pentium) Processor Type" and change this to what best matches your CPU. I
freesco:howtos:create_a_cgi_script_using_only_shell_scripting: 4 Hits
Freesco box as root (via telnet/console/SSH), and type: <code>cd /wwa/cgi edit info.cgi</code> Now, co... [ "$R" != "1" ]; then R="0"; fi cat <<-! Content-type: text/plain ! case "$Q" in "ipaddr") getip;; "... ot be wrapped when you save them. If you've hand-typed this, and it's not working, pay particular atten
 
 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki