You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate button.


freesco:howtos:freesco_03x_mv2hdd_howto: 37 Hits
= This is a tutorial for setting up Freesco as a router in an Ethernet network. I'm by no means an expert... tact me ( We are going to set up a router which connects a network at home, office or where... === What we need is : === A pc to be used as the router. I use a 120Mhz Pentium with 64Mb ram and a small
freesco:howtos:how-to_automatically_run_scandisk: 23 Hits
e this! </note> Sometimes you might find that you router is in read-only mode, after a power failure for i... \\ However doing this manually every time on the router can be complicated (for instance if you have no monitor connected, or the router is in a distant place), so here is a solution that you can apply to
freesco:howtos:how-to_setup_a_mail_server: 19 Hits
search for this line :\\ <code>primary_hostname = router.inet</code> This indicates what emails going out ... ox will have as a domain.\\ You need to replace **router.inet** and put instead your dynamic hostname. Thi... cal_domains = localhost : your.dynamic.hostname : router.inet</code> You have to add every domain that you
freesco:howtos:exim_virtual_domains: 15 Hits
nfiguration. (For FREESCO 027 this file is **/mnt/router/packages/exim/configure**, for 03x this is **/usr... l_domains =;/mnt/router/packages/exim/domains.dbm </code> your line may ... 've located this file (on my FREESCO 027) in /mnt/router/packages/exim/domains.dbm. I suggest you use /pkg
freesco:manuals:027:3._configuration: 15 Hits
Initial Setup ==== Before you can configure the router you first need to log in and run setup. \\ When ... assuming you've previously used move2hdd) type: **router.bat setup** at the C:\> prompt. After a while yo... if}} If you wish to configure or reconfigure the router at a later time, it is also possible to run the s
freesco:manuals:027:3.4_dialup_router: 13 Hits
===== 3.4 Dialup router ===== Here is a picture of typical network with FREESCO as Modem-to-Ethernet router: {{freesco:manuals:027:dialup-lan-diagram.gif}} Let's pass step by step through setup for this type of router. <code> 711 Hostname of this computer [router]? Press <Enter> </code> Give a name
freesco:howtos:setting_up_subdomains_in_dns: 12 Hits
The DNS configuration is stored in the file /mnt/router/etc/named.hst. Here's how to update it. Brief version: Login as root, edit /mnt/router/etc/named.hst, and add one entry per subdomain in the forma... TAB>IN<TAB>A<TAB>IPaddress<TAB></code> Copy /mnt/router/etc/named.hst to /etc, restart your nameserver wi
freesco:howtos:el_cheapo_vpn_tunnel: 12 Hits
s ===== Step 1 ===== Unpack the tarball on both routers, like so: [Linux] cd /mnt/router/packages [... ps. For FREESCO 03x I suggest you change **///mnt/router/packages//** to **///usr/local//**. <code>[Linux... ep 2 ===== Next I create a master key on my home router. It creates a 576 bit [[
freesco:howtos:ad-blocking_with_freesco_without_ruining_the_hosting_page: 11 Hits
ains the files necessary to run the Freesco 0.2.7 router with an additional feature designed to replace ad... prompt, but leave the system to boot to the full router mode. * At the login prompt enter the usernam... === * At the MS-DOS prompt, change to the c:\router directory. <code>cd router</code> * Rename c:
freesco:howtos:monitorless_keyboardless_install_howto: 11 Hits
server and a local network connection between the router and PCs inside the network. Then you can run the Freesco router's setup program inside a Telnet window on one of those PCs. I wanted to do this because my Freesco router is on top of a high shelf, and I can't plug a monitor into it without moving a
freesco:howtos:backup_freesco_on_hd_from_a_dos_disk: 10 Hits
ot from a dos floppy disk and copy everything in /router over to another hard drive ? Yes ====== With Xco... et the files in the root directory as well as the router directory. Such as the --linux-.--- file ===== ... ootable drive * Make a directory on it called "router" and copy all of the base directory files to that
freesco:manuals:027:4._hard_drive_installation: 9 Hits
ation ===== Allthough FREESCO is a single floppy router, it can also be installed on a HDD. This opens th... d reboot the PC. At the C:\> prompt type: <code> router.bat setup </code> to boot FREESCO in setup mode, or: <code> router.bat </code> to boot FREESCO in normal mode. ==== 4.3 Booting automatically ====
freesco:manuals:027: 9 Hits
freesco:manuals:027:3._configuration#3.2_choosing_router_type|3.2 Choosing router type]] * [[freesco:m... ventions]] * [[freesco:manuals:027:3.4 Dialup router]] * [[freesco:manuals:027:3.5 Leased line router]] * [[freesco:manuals:027:3.6 Ethernet router]] * [[freesco:manuals:027:3.7 Ethernet bri
freesco:howtos:create_a_cgi_script_using_only_shell_scripting: 8 Hits
I interface to retrieve some information from the router (namely: the router's uptime, version, and our ex... ,..[0-9].user.*/!d; s///; s/:/ hours, /; '` echo "Router has been up for: $U minutes"; else cat /proc/upti... i } getversion() { if [ "$R" = "0" ]; then echo "Router is running on:"; fi cat /proc/version | sed 's/(.
start: 2 Hits
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki