Search

You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate button.

Results


freesco:howtos:how-to_setup_a_mail_server: 19 Hits
on ===== When you set a mail system you minimaly need 2 things: a smtp server and a pop server. A **S*... m AND sends them also. On your Freesco, you will need to tell exim that it can only serve your.dyndns.o... pa3d\\ - Fetchmail + Exim + Popa3d.\\ \\ What you need to do is understand how the software packages rel
freesco:manuals:rfc1918: 12 Hits
et-wide IP connectivity the organization would need to change IP addresses (renumber) all of its publ... etween enterprises. Category 2: hosts that need access to a limited set of outside ... enterprises. Category 3: hosts that need network layer access outside the
freesco:howtos:setting_up_an_development_environment: 10 Hits
In order to setup the Zipslack, the following is needed: - A pc. I use my daughters Celeron 566 with... 8 but any of the other should do fine. This OS is needed as Zipslack is run from DOS - An internet co... we have the correct source code in place and just need to configure and make the kernel. The source is l
freesco:howtos:compiling_programs_for_use_with_freesco: 10 Hits
ools. Thus, to compile programs for Freesco, you need to be able to compile programs to a Linux 2.0.38 ... ate the kernel to 2.0.38 (from 2.0.37). You will need to download these files: * [[http://slackware.... 38.tar.gz (the source code to the 2.0.38 kernel, needed to recompile the kernel and to compile programs
howtos:ip-subnetworking: 10 Hits
ore diving into the delight of sub-networking, we need to establish some IP number basics. 3.1. I... ion problem if all IP computers at a large site need to be connected to the same network: trying to ... ses incompatible networking technologies and need to interconnect them (as mentioned above). 6.
freesco:howtos:el_cheapo_vpn_tunnel: 9 Hits
Micro$oft's VPN. It also runs on two 386 PC's if needed... {{freesco:howtos:vpn.png|VPN tunnel}} Both... ope of this howto). Both boxes do not neccesarily need to be the same FREESCO version, but to keep it si... en the VPN link goes down for some reason and you need to fix it at the other side). * devices ///dev
freesco:howtos:gallery_03x: 9 Hits
machine and run it from there ;-) ==== What do I need? ==== Well, of course you'll need al working vers... a lot of images in your Gallery, you'll probably need a system that is a bit faster. You also need a wo... etje.homeip.net/kernels/)) Another package you'll need is **utils_1.0_dingetje** ((or utils_1.1_dingetje
freesco:howtos:phpbb: 8 Hits
BB homepage: http://www.phpbb.com ==== What do I need? ==== **Freesco end:**\\ Well, of course you'll need al working version of Freesco 03x, I'm using 0.3.3 myself. I'm running it on a Pentium 200MMX-64... that if you expect a lot of users you'll probably need a system that is a bit faster.\\ You need a worki
freesco:manuals:03x:modules.html: 8 Hits
already built into FREESCO, and therefore do not need installing manually: ^ driver ^ Supported ca... our network. The more you have the more space you need. If you dont use dhcp, you should keep at least 5... If you dont have enough room for the drivers you need, you'll have to install on a hard drive. Copy th
freesco:howtos:null_modem: 8 Hits
Advantages of such a system are: * Cheap.\\ It needs only a null-modem cable for each computer (up to... s' built-in DUN to connect to the network without need of specialist software on the client. * Quick.\\ Needs little configuration of client machines (only a dummy modem driver which is supplied with a
freesco:howtos:installing_nic_s: 8 Hits
_nics | Top]] ] =====Finding a driver===== You need a driver to be able to use your NIC with FREESCO.... rts right out of the box as well as the NICs that need additional drivers. If your card is one of the on... .uk/isapnptools/ # # Compiler flags: -DREALTIME -DNEEDSETSCHEDULER # # Trying port address 0203 # Board
freesco:manuals:027:modules.htm: 8 Hits
already built into freesco, and therefore do not need installing manually: ==== Built in drivers ==== ... our network. The more you have the more space you need. If you dont use dhcp, you should keep at least 5... If you dont have enough room for the drivers you need, you'll have to install on a hard drive. Copy th
freesco:howtos:howto_setup_phpbb2: 7 Hits
BB homepage: http://www.phpbb.com ==== What do I need? ==== Well, of course you'll need al working ver... that if you expect a lot of users you'll probably need a system that is a bit faster. Installing a PHP a... s a lot (at the expense of more RAM).\\ You also need a working Web server with PHP enabled. I use apac
freesco:howtos:howto_unison_and_xinetd: 7 Hits
y the Unison process only. If for some reason you need these files accessible by others, you may need to... ownload other versions for other clients, but you need this one for your server. 2. Decide where Unison... l be using a "chroot jail", all files that Unison needs to work with (including the executable itself, a
 
 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki