Search

You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate button.

Results


freesco:howtos:how-to_setup_a_mail_server: 17 Hits
n't work without the other.\\ \\ FOR THE NEWBIES like myself that need to have some things spelled out. Popa3d (or Qpopper) like mentioned previously is a POP3 SERVER, another way to think of this, is, i... n be a domain obtained from a dynamic DNS service like dyndns or no-ip. \\ In my case my hostname is **f
wiki:syntax: 11 Hits
com|This Link points to google]]. Email addresses like this one: <andi@splitbrain.org> are recognized, t... m|This Link points to google]]. Email addresses like this one: <andi@splitbrain.org> are recognized, t... iki]]. ==== Windows Shares ==== Windows shares like [[\\server\share|this]] are recognized, too. Plea
freesco:howtos:el_cheapo_vpn_tunnel: 7 Hits
testing of his howto and making this page. I also like to thank **scooterboy** for testing this howto. ... when things are setup properly (although it seems like a sane thing to me to be able to login to the rem... Step 1 ===== Unpack the tarball on both routers, like so: [Linux] cd /mnt/router/packages [Linux]
freesco:project_team_members: 6 Hits
arly 2000. I got 'hooked' within 2 months. Most likely it was sooner than that, cause my FREESCOsoft s... o access the files (get a list) that did not look like a note book list. So I made a few pages and link... d is still looking towards more growth (would not like the work, but would like the growth and usage peo
freesco:howtos:turn_freesco_into_an_mp3_server: 5 Hits
ory. You'll want to rename them something *small* like CGI.zip and PY.tar.gz, otherwise, when you boot z... les (you can split them up, or have them together like me, it makes no difference as you'll be specifyin... t boot time, you can create a simple shell script like the following: <code>#!/bin/sh # # start the e
freesco:howtos:setting_up_an_development_environment: 5 Hits
ompiled versions to work on my Zipslack. It looks like it needs a lib that is unavailable for Zipslack 3... t your NIC. Information is displayed in a DOS-box like this: \\ {{freesco:howtos:effo:niclister.gif}}\\ ... O is booted, run the setup an configure it as you like (NICs, etc). It might be a good idea to disable s
freesco:manuals:rfc1918: 4 Hits
to the Internet. To the contrary, it is quite likely that when the organization would connect to the... undesirable for privacy/security reasons. Just like hosts within the first category... individually addressable via TCP/IP. It is very unlikely that these displays need to be direc
freesco:howtos:installing_nic_s: 4 Hits
dump is opened in an editor and it look something like this: <code># $Id: pnpdump.c,v 1.9 1997/06/10 2... s done by uncomment the configuration so it looks like this: <code>(CONFIGURE INT1031/-915072494 (LD 0 #... installing_nics | Top]] ] =====PCI NICs===== Unlike the ISA NIC's, these cards are not configured usi
freesco:howtos:install_a_2nd_harddisk: 4 Hits
is an old 120MHz with BIOS from 1996 or something like that. I realised that BIOS wouldn't recognize my ... orums I found a post from BHN2 saying "Freesco is like all good Linuxes, Freesco does not care about the... htforward and when done I had four new partitions like this: ^ Device Boot ^ Start ^ End ^ Blo
freesco:howtos:gallery_03x: 4 Hits
online. Of course feel free to use another editor like the build in freesco editor or the one in the mc ... to install your Gallery (this can be anything you like). <code> cd /www mkdir photoalbum cd photoalbum <... -) You'll need to put the NetPBM files in a place like "/usr/local/NetPBM" <code> cd /usr/local mkdir Ne
freesco:howtos:what_to_do_with_your_new_freesco: 4 Hits
**/rc/rc_ftpd**). The original startup line looks like this: <code>fork pure-ftpd $D -A -b -c $FTPCON -... means that after editing the line, it should look like this: <code>export TTY="`tty`" TERM=linux PS1 PA... path as well as accessing the mySQL binaries just like this: <code>[Linux] mysqladmin</code> The final
freesco:howtos:exim_virtual_domains: 4 Hits
the line with **local_domains** and make it look like this: <code> qualify_domain = dingetje.homeip.... *domainlist local_domains** and change it to look like this: <code> domainlist local_domains = localhos... our virtual domains listed on a single line each, like so: <code> dingetje.homeip.net dingetje.ho
freesco:howtos:rj45: 3 Hits
through software control) if the uplink port acts like a normal port (like any other on the back of the device) or like an uplink port (RTS/RTR crossed and Send/Recieve crossed).
freesco:howtos:mini_sendmail: 3 Hits
fdesigns.com/node/82]] Some linux distributions, like FREESCO, do not include sendmail in their base in... i_sendmail]] that you can install on your FREESCO like so: <code> cd /pkg/sbin snarf -n http://dingetje.... d defaults to "/usr/bin/sendmail -t -i")) to look like this: <code> sendmail_path = /pkg/sbin/mini_send
start: 1 Hits
 
 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki