Search

You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate button.

Results


freesco:howtos:setting_up_an_development_environment: 9 Hits
w is commented out and not active. By default the first row is active. This row specifies that the kernel... he most common place to find the kernel is on the first partition on IDE disk A (dev/hda1). Hence we must... d idea. ====Getting the new kernel sources==== First you must get the kernel sources. Start your machi
freesco:project_team_members: 8 Hits
ally do and began making packages for FREESCO. At first with the Apache package, just because everyone sa... ly consider an honor to know. ==== howler ==== I first started checking out / looking at FREESCO in earl... to see each other. In less than a day, I had my first FREESCO machine up and running. It was serving t
freesco:howtos:exim_virtual_domains: 7 Hits
r FREESCO. ==== exim 3.x configuration ==== The first step is to change your exim configuration. (For F... bvious reasons, make a backup of your config file first!\\ Locate the line with **local_domains** and mak... ur exim configuration and add this section as the first handler: <code> # # for virtual domains # virtual
howtos:ip-subnetworking: 6 Hits
IP numbers belong to Interfaces - NOT hosts! First of all, let's clear up a basic cause of misunders... ero - that is a decimal value of 0 to 127 for the first dotted quad. So there are a maximum of 128 c... orks thus have a range of 128 to 191 for the first of the dotted quads, with each network conta
freesco:manuals:rfc1918: 5 Hits
ons. Just like hosts within the first category, such hosts may use IP... nambiguous. We will refer to the hosts in the first and second categories as "private". We will r... .255 (192.168/16 prefix) We will refer to the first block as "24-bit block", the second as "20-bit
freesco:howtos:gallery_03x: 5 Hits
o expansive. Sorry for that ;-) But I remember my first Freesco-days when I read howto's that I couldn't ... nd install them ;-) ==== Gallery and NetPBM ==== First we'll download and "install" the latest version o... time you want to access the setup of Gallery, you first have to set in into "configure"-mode. <code> cd
freesco:howtos:how-to_setup_a_mail_server: 4 Hits
**/etc/exim.conf**. <note classic> Before you do, first make a backup of the original config file; before... . === For exim 3.x === Add these lines as the **first** router in the ROUTERS section of your exim conf... TP server.\\ **IMPORTANT** This must be the **FIRST** router.\\ Save changes (alt+x, y) and restart
freesco:manuals:03x:readme.txt: 4 Hits
ove the .sx extension so it is just name "kernel" first. There are three system passwords you will be as... ever. To install your router on a hard drive you first need to prepare the drive - it should be formatte... have this, boot from the freesco disk, and at the first screen use the mv2hd command. The router and any
freesco:howtos:build_in_commands: 4 Hits
hh:mm:ss) %U week number of year with Sunday as first day of week (00..53) %V week number of year with Monday as first day of week (01..52) %w day of week (0..6); 0 represents Sunday %W week number of year with Monday as first day of week (00..53) %x locale's date representation (mm/dd/yy) %X
freesco:howtos:plug_and_play: 4 Hits
do you go about this? It's quite simple, really. First, make sure that any cards that you want to be PnP... the configuration required. # Note that only the first value of any range is given, this may be changed ... r devices. You'll notice that they are simply the first available slots. Each resource needed (normally
freesco:manuals:027:3._configuration: 3 Hits
tup ==== Before you can configure the router you first need to log in and run setup. \\ When booting fr... to the setup script. {{freesco:manuals:027:setup-first-page.gif}} If you wish to configure or reconfigu... e device providing the internet connection to the first network interface, and the remaining two can conn
freesco:manuals:03x:modules.html: 3 Hits
all a driver on a floppy installation of FREESCO, first make sure the driver name follows the DOS 8.3 con... a driver on a hard drive installation of FREESCO, first copy the required driver file to a floppy disk, (... ds in a different order to what you expected. The first card to be detected is labeled eth0, the second e
freesco:howtos:phpbb: 3 Hits
o expansive. Sorry for that ;-) But I remember my first Freesco-days when I read howto's that I couldn't ... oblem, ask at the phpBB forums (search the forums first!): http://www.phpbb.com/phpBB/ - If you think p... you can ask your question here (search the forums first!):\\ * http://forums.Freesco.org or * htt
freesco:manuals:clients:winnt:printing: 3 Hits
u can install the TCP/IP print services, you must first install TCP/IP. </file> ==== Installing TCP/IP Printing Service ==== First step is thus to make sure [[freesco:manuals:clients:winnt:tcpip_printing_... order to print to a TCP/IP print server, you must first create a printer (print queue) on the NT Server a
wiki:syntax: 1 Hits
 
 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki