You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate button.


Matching pagenames:

freesco:manuals:rfc1918: 53 Hits
February 1996 Address Allocation for Private Internets Status of this ... using TCP/IP and in particular determining the addressing plan and address assignments within that network. This document describes address allocation for private internets. The allocation permi
howtos:ip-subnetworking: 41 Hits
work! Despite this, most people refer to host addresses when referring to an IP number. Just remember... ost interfaces on that network. Class A addresses always have the leftmost bit of the leftmost by... quads) to identify host interfaces. Class B addresses always have the leftmost 2 bits of the leftmost
freesco:howtos:build_in_commands: 23 Hits
rs the local network for new machines anytime MAC addresses are used in the restrict.cfg file. /bin/backup... ns [-f] -f forces an update of your external IP address even if the status is already up to date. /bin... trols network interfaces. options: [up down] [(IP address)] [netmask (nn.nnn.nnn.nnn)] /bin/ile Binary Usa
freesco:howtos:how-to_setup_a_mail_server: 20 Hits
e range.\\ \\ If for instance you use 192.168.0.x addresses in your network, it should look like : <code>ho... omputer on the lan using : <code>telnet router.ip.address 25</code> **router.ip.address** being the IP address of FREESCO</box> at the prompt you should get something like : <code>220 ESMTP
freesco:howtos:installing_nic_s: 19 Hits
nfiguring these cards means assigning them a base address (I/O) and an IRQ. This can be done in two ways, d... the cards statically, you assign each card a base address and an IRQ. The same information is then entered ... formation such as IRQ:s it can handle, valid base addresses, etc, and dumps this to a file called ''isapnp.
freesco:howtos:el_cheapo_vpn_tunnel: 17 Hits
* Both private LAN's must have a **different** IP addressing scheme, otherwise it will not be possible to m... have OpenSSH package installed. * external IP addresses of each box or their (dynamic) domain names. ... work and my church's network (which I set up). IP addresses have been changed to protect the innocent :-)
freesco:howtos:howto_configure_xinetd: 16 Hits
n is successful. By default, the remote host's IP address and the process ID of server processing the reque... uccess). * **HOST** — Logs the remote host's IP address (log_on_failure and log_on_success). * **PID** ... ** and **no_access** options can use a list of IP addresses or host names, or can specify an entire network
freesco:manuals:027:5._client_setup: 13 Hits
REESCO router. ==== 5.1 Default gateway, DNS, IP address, and Subnet Mask ==== These TCP/IP network setti... CP are two very different ways of obtaining an IP address for your computer. DHCP (__D__ynamic __H__ost __... ter to automatically obtain a fully functional IP address from the central DHCP server. DHCP is the default
freesco:manuals:clients:winxp:tcpip_static: 12 Hits
your Network Interface Card (NIC) for a Static IP Address with Windows XP. Click on the thumbnails below to... indow, change the selected item from Obtain an IP address automatically to **Use the following IP address**. Pick an IP address in the same address range as your FREESCO router's internal LAN, but stay **out
freesco:manuals:clients:winnt:tcpip_static: 11 Hits
llowing information: * the FREESCO's router IP address on the LAN side, in this document that is * a free TCP/IP address in the same range as the FREESCO router. * a netmask * DNS server address, this can be the FREESCO router address if local DNS service is enabled. The first step i
freesco:manuals:027:3.4_dialup_router: 11 Hits
local network respectively. <code> 811 I/O port address of 1st ethernet card [0x300]? </code> Enter hexadecimal address here. Some ethernet cards are plug-n-play and their Linux drivers don't require this address and you can leave it default. Do not use 300, or 300h here when the card is at address 0x300
freesco:manuals:clients:winnt:tcpip_dhcp: 9 Hits
nt:network_dns.png|DNS settings}} The DNS server addresses can be left blank, since that information is al... . . : AMD PCNET Family Ethernet Adapter Physical Address. . . . . . : 00-50-56-40-05-4E DHCP Enabled. . . . . . . . : Yes IP Address. . . . . . . . . : Subnet Mask . . . . . . . . : 255.255.255
freesco:manuals:clients:win2k:tcpip_static: 9 Hits
llowing information: * the FREESCO's router IP address on the LAN side. * a free IP address in the sa... he FREESCO router. * a netmask * DNS server address, this can be the FREESCO router address if local ... ME Here you enter all the required info: * IP address: the address for this Win2K client. * Subnet m
freesco:howtos:exim_virtual_domains: 9 Hits failed to verify: Unrouteable address search_tidyup called [Linux] </code> Excellent! ... lient for which webmaster the mail originally was addressed to. However, there is no user ikke, so let's se... failed to verify: Unrouteable address search_tidyup called [Linux] </code> Perfect! Th
freesco:faq: 1 Hits
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki